Packout Dewalt Heat Gun (DIGITAL 3D PRINT FILE ONLY)

THIS IS A DIGITAL STL FILE FOR 3D PRINTING NOT A PHYSICAL PRODUCT. You will not receive a physical product, this is a digital 3D file so you can personally 3D print your own insert.

This is a custom insert that I have designed to fit your Milwaukee Packout to store your Dewalt Barrel Jigsaw and accompanying kit. It specifically fits the Milwaukee 48228435 PACKOUT Compact Organiser.

The specific Dewalt Heat Gun that this is designed for is model DCE530, link is provided here: https://www.dewalt.com.au/product/dce530n-xj/18v-xr-heat-gun-bare-unit?tid=572676

My design includes allowances for you to fit both the standard 18V batteries, or the 54V Flex Volt Batteries! As demonstrated in the photos, there is a removable tub. This tub can be used for parts storage or an 18V battery. This tub can then be lifted out if you'd like to fit one of the 54V Flex Volt Batteries instead.

These are large parts, so you may need to slice them up smaller to get them to fit on your printer. If you would like to see the size of each part, look at the last image above which is dimensioned. If you print the files that have been split already, I have included overlapping lips in the designs for each half where you can easily apply adhesive for a strong join.

TERMS OF USE

• This 3D file is strictly for personal use/3D printing only. It is not to be used for redistribution or for use in mass manufacture or profit in any form.
• The ONLY people authorised to sell physical prints using my designs/3D models are vendors who have contacted me in advance to discuss this possibility. I conduct this review process to ensure print quality and to review the reputation of the vendor. If you would like to discuss the possibility of joining as an approved vendor, contact me via my design email: jonahpopedesign@gmail.com