Packout M12 Rotary Tool (New Brushless) (DIGITAL 3D PRINT FILE ONLY)

THIS IS A DIGITAL STL FILE FOR 3D PRINTING NOT A PHYSICAL PRODUCT. You will not receive a physical product, this is a digital 3D file so you can personally 3D print your own insert.

This is a custom insert that I have designed to fit your Milwaukee Packout to store your M12 Rotary Tool (Brushless) and all your accompanying and kit/Dremel Bits. It specifically fits the Milwaukee 48228435 PACKOUT Compact Organiser.

The specific M12 Rotary Tool (Brushless) that this is designed for is model 2525-20. This is the most recent model released in 2023/2024. You can view further details on the tool here: https://www.milwaukeetool.com/Products/2525-20

Features - Super Flexible Design

• Double Layered Storage - Two lift out trays reveal even more storage underneath the tool itself and the main bit storage area.
• Battery Storage - Room to store your tool with a 2.0 battery installed plus room for an additional 2.0 battery PLUS one of the higher capacity 4.0 - 6.0 batteries.
• No Loose Dremel Bits - I designed my inserts to follow the contours of the Packout lid when closed. You can rest assured you won't have your Dremel bits jumping over dividers whilst in transport or carrying your Packout.
• Quick Select - Dedicated storage slots included near the head of the tool for storing your most frequent bits for easy selection.

FileFile Sizes/Dimensions:

These are large parts. Files are provided for both single part prints or printing in halves with my pre-split files. My pre-split files have sections included that allow the two halves interlock and allow for easy application of super glue.

If you want to see the sizes of each part, please look the at last image in the gallery above to see photos with the part sizes/dimensions. If the pre-split parts are still too large, you may need to slice them up smaller, so they fit your printer. 

TERMS OF USE

• This 3D file is strictly for personal use/3D printing only. It is not to be used for redistribution or for use in mass manufacture or profit in any form.
• The ONLY people authorised to sell physical prints using my designs/3D models are vendors who have contacted me in advance to discuss this possibility. I conduct this review process to ensure print quality and to review the reputation of the vendor. If you would like to discuss the possibility of joining as an approved vendor, contact me via my design email: jonahpopedesign@gmail.com