Packout M12 Drill Gen 2 and Impact Surge Driver (DIGITAL 3D PRINT FILE ONLY)

THIS IS A DIGITAL STL FILE FOR 3D PRINTING NOT A PHYSICAL PRODUCT. You will not receive a physical product, this is a digital 3D file so you can personally 3D print your own insert.

This is a custom insert that I have designed to fit your Milwaukee Packout to store your M12 Drill and Hydraulic Impact Driver. It specifically fits the Milwaukee 48228435 PACKOUT Compact Organiser

This design actually includes 2 inserts help you maximise your set up! Once the Drill is accounted for, there was still extra space left which is why I designed an organiser tray to sit underneath the M12 insert. This extra inserts is perfect for storing your driver bits, drill bits, screws and other items to go with your M12 Drill! Of course, this extra insert is entirely optional, the M12 Drill insert fits inside the Packout with or without the organiser insert. This allows you to go with which ever option suits you.

These are the specific tools this insert is designed for:

• https://www.milwaukeetool.com.au/power-tools/drills/hammer-drills/M12FPD-0.html
• https://www.milwaukeetool.com.au/power-tools/impacts-and-fastening/impact-drivers/M12FQID-0.html

These are large parts, so you may need to slice them up smaller to get them to fit on your printer. If you would like to see the size of each part, look the at last image above which is dimensioned. To help with this you have 2 options, you can either print it in one single piece, or print it in halves and glue it together. Files are provided for either option. If you print the files that have been split already, I have included 6mm holes in the designs for each half where you can glue in some threaded rod to reinforce your print.

TERMS OF USE

• This 3D file is strictly for personal use/3D printing only. It is not to be used for redistribution or for use in mass manufacture or profit in any form.
• The ONLY people authorised to sell physical prints using my designs/3D models are vendors who have contacted me in advance to discuss this possibility. I conduct this review process to ensure print quality and to review the reputation of the vendor. If you would like to discuss the possibility of joining as an approved vendor, contact me via my design email: jonahpopedesign@gmail.com