Packout Compact Tool Box - M12 Cable Stapler UPPER Insert (DIGITAL 3D PRINT FILE ONLY)

THIS IS A DIGITAL STL FILE FOR 3D PRINTING NOT A PHYSICAL PRODUCT. You will not receive a physical product, this is a digital 3D file so you can personally 3D print your own insert.

This is a custom insert that I have designed to fit your Milwaukee Packout Compact Tool Box to store your M12 Cable Stapler. It specifically fits the Milwaukee 48228422 PACKOUT Compact Tool Box: https://www.milwaukeetool.com.au/storage/packout/tool-boxes/48228422.html

This is the specific tool the insert is designed for: https://www.milwaukeetool.com.au/power-tools/nailers/staplers/M12BCST0.html

Features:

• I've designed this insert to suspend from the top of the Ammo Can Packout and hang down similar to the stock tray that comes standard with the box. This design will house the Stapler, Batteries and staple supplies.
• Recessed handles are provided at each end of the insert to help you with lifting out the insert and access gear in the bottom of the box.
• You can use your belt hook on both sides of the tool. I have ensured allowances have been made to suit both. If the hook is on the right side It will have a spot in the tray to allow it to sit without obstruction. If the hook Is on the Left side (like in my photos), it will simply fit within the empty area of the underside of the lid.

File Size Note:

These are large parts, so you may need to slice them up smaller to get them to fit on your printer. If you would like to see the size of each part, look the at last image above which is dimensioned. If you print the files that have been split already, you can simply glue the halves together as I have made allowances for the pieces to help slot together nicely if you print them in halves using my provided files.

TERMS OF USE

• This 3D file is strictly for personal use/3D printing only. It is not to be used for redistribution or for use in mass manufacture or profit in any form.
• The ONLY people authorised to sell physical prints using my designs/3D models are vendors who have contacted me in advance to discuss this possibility. I conduct this review process to ensure print quality and to review the reputation of the vendor. If you would like to discuss the possibility of joining as an approved vendor, contact me via my design email: jonahpopedesign@gmail.com