Packout Drawer M12 Cable Stapler (DIGITAL 3D PRINT FILE ONLY)

THIS IS A DIGITAL STL FILE FOR 3D PRINTING NOT A PHYSICAL PRODUCT. You will not receive a physical product, this is a digital 3D file so you can personally 3D print your own insert.

This is a custom insert that I have designed to fit your Milwaukee Packout Drawers to store your M12 Cable Stapler. It specifically fits the Milwaukee 2 & 3 Drawer units (48-22-8443 & 48-22-8442). There's room to store your Cable stapler, heaps of staple supplies and even two 2.0Ah Batteries. There is staple storage available both under the stapler and in the tub that runs the length of the insert on the side. 

This is the specific tool the insert is designed for: https://www.milwaukeetool.com.au/power-tools/nailers/staplers/M12BCST0.html

This is the ultimate modular storage solution for your Packout Drawers! Files are provided for having your insert on either the left or right side. I will have many more designs to share for the drawers soon so you can mix and match your inserts to set up your own perfect drawer units!

BELT HOOK NOTE:
If your belt hook is on the same side as what is pictured above (the right side of the tool when holding it) you will need to print the "standard" files. If your belt hook is on the opposite side of the tool (the left when holding it), you will need to print the "mirrored."

This ensures that your tool sits flat without the belt hook hanging underneath. The tolerances of the 3 drawer units meant that the only way to fit this tool with the belt hook AND have staple storage under the tool was to have the hook facing towards the bottom of the drawer.

File Size Note:

These are large parts, so you may need to slice them up smaller to get them to fit on your printer. If you would like to see the size of each part, look the at last image above which is dimensioned. If you print the files that have been split already, I have included 6mm holes in the designs for each half where you can glue in some threaded rod to reinforce your print.

TERMS OF USE

• This 3D file is strictly for personal use/3D printing only. It is not to be used for redistribution or for use in mass manufacture or profit in any form.
• The ONLY people authorised to sell physical prints using my designs/3D models are vendors who have contacted me in advance to discuss this possibility. I conduct this review process to ensure print quality and to review the reputation of the vendor. If you would like to discuss the possibility of joining as an approved vendor, contact me via my design email: jonahpopedesign@gmail.com