Packout M12 Dremel (DIGITAL 3D PRINT FILE ONLY)

THIS IS A DIGITAL STL FILE FOR 3D PRINTING NOT A PHYSICAL PRODUCT. You will not receive a physical product, this is a digital 3D file so you can personally 3D print your own insert.

This is a custom insert that I have designed to fit your Milwaukee Packout to store your M12 Dremel/Rotary Tool and accompanying your bits and kit. It specifically fits the Milwaukee 48228435 PACKOUT Compact Organiser.

The specific M12 Dremel/Rotary Tool that this is designed for is model C12RT-0, link is provide here: https://www.milwaukeetool.com.au/power-tools/speciality-tools/rotary-tools/C12RT-0.html

With this insert you can maximise every single part of the Packout! The tool insert lifts out to reveal even more storage underneath for supplies! Plus there's the large tubs so you can add even more of your supplies and batteries into. The organiser tub on the left is also double layered, allowing for even more bit storage underneath. Furthermore, the design interlocks into the underside of the lid to keep your kit in their correct tubs. I’ve also designed an insert for the actual Dremel branded rotary tool. Just go to my store and scroll down to the Dremel Branded section

These are large parts, so you may need to slice them up smaller to get them to fit on your printer. If you would like to see the size of each part, look the at last image above which is dimensioned. If you print the files that have been split already, I have included 4 & 6mm holes in the designs for each half where you can glue in some threaded rod to reinforce your print.

TERMS OF USE

• This 3D file is strictly for personal use/3D printing only. It is not to be used for redistribution or for use in mass manufacture or profit in any form.
• The ONLY people authorised to sell physical prints using my designs/3D models are vendors who have contacted me in advance to discuss this possibility. I conduct this review process to ensure print quality and to review the reputation of the vendor. If you would like to discuss the possibility of joining as an approved vendor, contact me via my design email: jonahpopedesign@gmail.com