Packout M12 Install Driver NEW V2 DESIGN (DIGITAL 3D PRINT FILE ONLY)

THIS IS A DIGITAL STL FILE FOR 3D PRINTING NOT A PHYSICAL PRODUCT. You will not receive a physical product, this is a digital 3D file so you can personally 3D print your own insert.

This is a custom insert that I have designed to fit your Milwaukee Packout to store your M12 Install Driver. It specifically fits the Milwaukee 48228435 PACKOUT Compact Organiser.

The specific tool that this is designed for is model M12FDDX, links are provided here:

https://www.milwaukeetool.com.au/power-tools/drills/drill-drivers/M12FDDXKIT202B.html

NEW AND IMPROVED STORAGE OF THE SWAPPABLE HEADS:

This is my NEW V2 version of my insert for the M12 Install Driver. My original V1 design was one of the earliest designs I did. After much design work, I knew I could create a brand new design for this same tool that was better in every way.

• The M12 Install Driver can now fit above the swappable heads.
• The swappable heads have a dedicated storage space in the base of the insert under the tool.
• Whilst the tool is inserted, it stops the swappable heads from jumping around, even when you use the carry handle.
• You can now use the belt hook on both sides.
• There is now WAY MORE room for storage. Meaning you can now easily fit the 5.0ah and 6.0ah M12 batteries.
• You can also fit the tool with the 2.0ah inserted.
• I have a HUGE range of custom modular tubs you can print to maximise your use of the front half of the insert. More details below.

FULLY CUSTOMISABLE TUBS:

My new V2 design allowed me to have a huge area free at the front of the case for general storage. For that, I designed a massive variety of modular tubs you can pick from for storing extra gear and consumables.

• There are 18 different tub designs available for you to pick from. You can see more details in the gallery above on photo 3 and 6.
• Tubs are divided into 3 different versions, "A," "B," and "C."
  • A - The deepest of the tubs extending the full depth/height of the Packout
  • B & C - The B and C tubs work in unison. They are each half the height of the A tubs, meaning they can be stacked on top of each other, doubling the options for small parts/driver bit storage.
• The B and C tubs may look similar, but have important differences. The biggest being how they interact with the tabs seen in photo 7 above.
  • B - These will actually sit on top of these tabs, in fact you could just use 2 "B" tubs without "c" tubs underneath, and they will still sit exactly flush to the underside of the lid. They also have allowances in their design to allow them to sit flush into the valleys of the clear lid, this stops any gear from jumping over dividers.
  • C - Has cut outs in the walls to allow it to sleeve down past the tabs that B sits on top of. This way they can sit flat on the bottom of the insert,
• You can use A, B & C tubs all in unison. For instance, you could have an A style full depth tub on the left half of the insert. Then on the right, you could use a B & C style tub in union stacked on top of each other. You have full control over your set up! Simply select with tubs you'd like to print and customise your perfect insert!

BELT HOOK NOTE:

This design has allowances for inserting your Install driver with your belt hook on either the left or right side of the tool. The lid will close without issue either way. If on the left side (facing upwards), the tool sits angled down towards the front to allow clearance. If the hook is on the right, there is an alcove in the bottom of the print where the hook will sit. This alcove ensures you won't have other items get in the way.

PART SIZES:

These are large parts, so you may need to slice them up smaller to get them to fit on your printer. If you would like to see the size of each part, look the at last image above which is dimensioned. If you print the files that have been split already, you can simply glue the two halves together with CA Superglue. This is how I glued mine and it's incredibly sturdy.

TERMS OF USE

• This 3D file is strictly for personal use/3D printing only. It is not to be used for redistribution or for use in mass manufacture or profit in any form.
• The ONLY people authorised to sell physical prints using my designs/3D models are vendors who have contacted me in advance to discuss this possibility. I conduct this review process to ensure print quality and to review the reputation of the vendor. If you would like to discuss the possibility of joining as an approved vendor, contact me via my design email: jonahpopedesign@gmail.com