Packout M12 Power File (DIGITAL 3D PRINT FILE ONLY)

THIS IS A DIGITAL STL FILE FOR 3D PRINTING NOT A PHYSICAL PRODUCT. You will not receive a physical product, this is a digital 3D file so you can personally 3D print your own insert.

This is a custom insert that I have designed to fit your Milwaukee Packout to store your M12 Power File and accompanying kit. It specifically fits the Milwaukee 48228435 PACKOUT Compact Organiser.

The specific M12 Power File that this is designed for is model 2482-20, link is provide here: https://www.milwaukeetool.com/Products/2482-20

It should also fit the alternate model with the shorter arm, as that appears to utilise the exact same main body. This is model number 2483-20.

https://www.milwaukeetool.com/Products/Power-Tools/Metalworking/Sanders-and-Polishers/

These are large parts, so you may need to slice them up smaller to get them to fit on your printer. If you would like to see the size of each part, look the at last image above which is dimensioned. If you print the files that have been split already, I have included 6mm holes in the designs for each half where you can glue in some threaded rod to reinforce your print. You will then need to glue the halves together, including the walls that make up the organiser section that house the sanding belts.

TERMS OF USE

• This 3D file is strictly for personal use/3D printing only. It is not to be used for redistribution or for use in mass manufacture or profit in any form.
• The ONLY people authorised to sell physical prints using my designs/3D models are vendors who have contacted me in advance to discuss this possibility. I conduct this review process to ensure print quality and to review the reputation of the vendor. If you would like to discuss the possibility of joining as an approved vendor, contact me via my design email: jonahpopedesign@gmail.com