Packout Compact Tool Box - M18 Router Insert Part 2/2 (DIGITAL 3D PRINT FILE ONLY)

THIS IS A DIGITAL STL FILE FOR 3D PRINTING NOT A PHYSICAL PRODUCT. You will not receive a physical product, this is a digital 3D file so you can personally 3D print your own insert.

This is a custom insert that I have designed to fit your Milwaukee Packout Compact Tool Box to store your M18 Router Bases and accompanying accessories. It specifically fits the Milwaukee 48228422 PACKOUT Compact Tool Box: https://www.milwaukeetool.com.au/storage/packout/tool-boxes/48228422.html

This design is One Part of a Two Part design:

I wanted to create the ultimate design to store the router and the entire range of Milwaukee's extra bases and I was able to achieve this via the combination of these 2 fully custom designs I've created!

Specifically, the design available on this page is for the BOTTOM Insert (Insert 2/2). It's designed to sit in the bottom of the Ammo Can Packout and house all your extra bases and other essential router parts.

The UPPER Insert (Insert 1/2) will store your M18 Router Skin, M18 Battery and all your Router bits. This UPPER Insert (Insert 1/2) design is a separate Gumroad Listing.

You will ONLY receive the files for the BOTTOM insert when you purchase the files on this page. If you want to take full advantage of these two custom inserts working in tandem, you can find the listing for the Upper Insert (Insert 1/2) at the following Link: https://jonahpope.gumroad.com/l/m18router-ammo-part-a?layout=profile

Tools/Accessories that Fit In this Specific Insert:

• M18 Router Plunge Base - Model 48-10-5601: https://www.milwaukeetool.com/Products/48-10-5601
  • Dedicated storage is also included in the design for the following accessories for this base: Edge Guide, Edge Guide Rails & Dust Extraction Shroud
• M18 Router Offset Base - Model 48-10-5602: https://www.milwaukeetool.com/Products/48-10-5602
  • Dedicated storage is also included in the design for the following accessories for this base: Transfer Bit
• M18 Router Skin Accessories:
  • Dedicated storage is also included in the design for the following accessories from the standard M18 Skin: Edge Guide, Dust Extraction Shroud, Misc Spare Parts & Spanner

File Size Note:

These are large parts, so you may need to slice them up smaller to get them to fit on your printer. If you would like to see the size of each part, look the at last image above which is dimensioned. If you print the files that have been split already, you can simply glue the halves together.

TERMS OF USE

• This 3D file is strictly for personal use/3D printing only. It is not to be used for redistribution or for use in mass manufacture or profit in any form.
• The ONLY people authorised to sell physical prints using my designs/3D models are vendors who have contacted me in advance to discuss this possibility. I conduct this review process to ensure print quality and to review the reputation of the vendor. If you would like to discuss the possibility of joining as an approved vendor, contact me via my design email: jonahpopedesign@gmail.com