Packout Router Bit Insert (DIGITAL 3D PRINT FILE ONLY)

THIS IS A DIGITAL STL FILE FOR 3D PRINTING NOT A PHYSICAL PRODUCT. You will not receive a physical product, this is a digital 3D file so you can personally 3D print your own insert.

This is a custom insert that I have designed to fit your Milwaukee Packout to better store your router bits! It specifically fits the Milwaukee 48228435 PACKOUT Compact Organiser.

For holding your router bit in this holders, you naturally want for them to sit securely with a nice friction fit but still be easily removable. To ensure you can achieve this, a file is included that's labeled "Driver Bit - Tolerance Test." This file simply has a range of holes in different diameters that are labeled. You can print this to determine which size hole you would like to use. The hole sizes range from 6.6mm to 7.4mm and correspond to STL files of the full trays using the different diameter holes.

These are large parts, so you may need to slice them up smaller to get them to fit on your printer. If you would like to see the size of each part, look the at last image above which is dimensioned. To help with this you have 2 options, you can either print it in one single piece, or print it in halves and glue it together. Files are provided for either option. If you print it in halves, I have included 6mm holes where you can insert some metal rod or threaded rod for when you glue the halves together if you would like some extra rigidity.

TERMS OF USE

• This 3D file is strictly for personal use/3D printing only. It is not to be used for redistribution or for use in mass manufacture or profit in any form.
• The ONLY people authorised to sell physical prints using my designs/3D models are vendors who have contacted me in advance to discuss this possibility. I conduct this review process to ensure print quality and to review the reputation of the vendor. If you would like to discuss the possibility of joining as an approved vendor, contact me via my design email: jonahpopedesign@gmail.com