Packout M12 Staple Gun (DIGITAL 3D PRINT FILE ONLY)

THIS IS A DIGITAL STL FILE FOR 3D PRINTING NOT A PHYSICAL PRODUCT. You will not receive a physical product, this is a digital 3D file so you can personally 3D print your own insert.

This is a custom insert that I have designed to fit your Milwaukee Packout to store your M12 Staple Gun and all your extra staples. It specifically fits the Milwaukee 48228435 PACKOUT Compact Organiser.

The insert consists of 2 parts, the first is the insert for the Staple Gun itself. I've also designed this Staple Gun insert to have a empty space underneath the tool where you can store back up backs of staples.

The second is an organiser insert for your extra staples and a spare battery. I have included files for 3 different variants of these devisers so you can pick which you prefer for your set up! Look at the second image above to see a render showing these variants.

Belt Hook Note:

I have also included mirrored versions of the files that has them flipped. I have done this to account for folks that may have the belt hook attachment.

• If your hook is on the opposite side with the model number, you'll use the 'standard files.'
• If you use the hook on the side with the main Milwaukee logo, you will use the "mirrored files"

I've done this so that the hook hangs into the space under the tool in the insert to maximise how close I could have the tool to the inside of the lid. This allows for minimal movement of the tool in transit and also maximises space under the tool for extra storage! So simply pick the orientation that you prefer.

These are large parts, so you may need to slice them up smaller to get them to fit on your printer. If you would like to see the size of each part, look the at last image above which is dimensioned.

TERMS OF USE

• This 3D file is strictly for personal use/3D printing only. It is not to be used for redistribution or for use in mass manufacture or profit in any form.
• The ONLY people authorised to sell physical prints using my designs/3D models are vendors who have contacted me in advance to discuss this possibility. I conduct this review process to ensure print quality and to review the reputation of the vendor. If you would like to discuss the possibility of joining as an approved vendor, contact me via my design email: jonahpopedesign@gmail.com